Drilling Bit Types and Drilling Bit Selections

Currently in the drilling industry, there are two main categories of drilling bits: rolling cutter bits and fixed cutter bits. Plus, bit sizes vary from 3-7/8 inch to 36 inches.

 Rolling Cutter Bits

Rolling cutter bits, which some may also call roller cone bits or tri-cone bits, have three cones. Each cone can be rotated individually when the drill string rotates the body of the bit. The cones have roller bearings fitted at the time of assembly. The rolling cutting bits can be used to drill any formations if the proper cutter, bearing, and nozzle are selected.

There are two types of rolling cutter bits which are milled-tooth bits and tungsten carbide inserts (insert bits). These bits are classified by how the teeth are manufactured:

1. Milled-tooth bits


(Mill Tooth Bit)

Milled-tooth bits have steel tooth cutters, which are fabricated as parts of the bit cone. The bits cut or gouge formations out when they are being rotated. The teeth vary in size and shape, depending on the formation. Teeth of the bits are different depending on formations as follows:

Soft formation: The teeth should be long, slender and widely spaced. These teeth will produce freshly broken cuttings from soft formations.

Hard formation: The teeth should be short and closely spaced. These teeth will produce smaller, more rounded, crushed, and ground cuttings from hard formations.

2. Tungsten Carbide Insert (TCI) or Insert bits


 (Tungsten Carbide Insert Bit)

Tungsten Carbide Insert (TCI) or Insert bits generally have tungsten carbide inserts (teeth) that are pressed into the bit cones. The inserts have several shapes such as long-extension shapes, round shaped inserts, etc.

Teeth of the bits are different depending on the formation as follows:

Soft formation: Long-extension, chisel shape inserts

Hard formation: Short-extension, rounded inserts

Fixed Cutter Bits

Fixed cutter bits consist of bit bodies and cutting elements integrated with the bit bodies. The fixed cutter bits are designed to excavate holes by shearing formations rather than chippingor gouging formations, like rolling cutter bits. These bits do not have moving parts such as cones or bearings. The components of bits are composed of bit bodies fabricated from steel or tungsten carbide matrix and fixed blades integrated with abrasion-resistant cutters. The cutters in the bits that are available on the market are Polycrystalline Diamond Cutters (PDC) and natural or synthetic diamond cutters.

 (PDC Bit)

(Diamond Bit)

Nowadays, with the improvement that have been made in fixed cutter bit technology, the PDC bits can drill almost any kind of formations from soft to hard formation. However, if you plan to drill very hard formations, you might consider using diamond bits instead.


Related Post

Free BOP Drawing Template Thanks for Al.K. for sharing the BOP drawing template which might be advantageous for you all. This template was created by Benny Mason. Valves ...
Lag Time and Its Importance for Well Control Opera... Drilling personnel need to fully understand about the lag time. Lag time is time delay from pressure adjustment made on a choke valve or a choke HCR t...
Floating Offshore Structures – Offshore Structure ... There are many oil and gas discoveries which are out of reach of fixed structures for one reason or another. They may be in extremely deep water, or t...
Blowout – Oilfield Disaster That You Need to See These are some footage showing some oil drilling rigs were blown out and got fired. I would like to share these VDO clips to raise awareness of well c...
Share the joy
  • 1.4K
Tagged , . Bookmark the permalink.

About DrillingFormulas.Com

Working in the oil field and loving to share knowledge.

11 Responses to Drilling Bit Types and Drilling Bit Selections

  1. Sudish Bhat says:

    Thank you for the exhaustive information on bits. I would however appreciate if you could write a post on how to select drill bits using IADC Codes for different types of formations. It would be veryful for a lot of people.

    Thank you so much. God Bless.

  2. Buy pdc bits says:

    I read your blog. Your blog is so nice and also provide good knowledge for us. I like it and thanks to this blog.

  3. George Heckler says:

    Just a note there is a hybrid type bit with two insert cones and two PDC blades. Not many in use yet, but they do have their nitch.

  4. Ikem Elujekor says:

    Thanks for the good job in oil and gas industry. you have put me out of my many troubles.

  5. mohammed almusheti says:

    thank you for this article but i need the price for each type of bit specially the tungsten carbide insert.
    with my regards

  6. DILAWAR KHAN says:

    Very usefull information, Thanks

  7. TAFU says:

    Thank you for giving us very useful information

  8. RATUL GOGOI says:

    Please send the list how many type of drilling bit

  9. Saam says:

    I read it and found so feasible and usefull.thank you

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.