Geological Description Part 2 (last part)

clay stone and shale=Clay Stone & Shale (Clst&Sh).

Clay Stone & Shale are formed from accumulation of clay minerals and silt particles. Its grain size is less than 4 microns.

 

 

marl= Marl (Mrl).

Marl is formed from accumulation of clay minerals and calcium carbonate (calcite) and its grain size is less than 4 microns.

 

sand stone= Sandstone (Sst)

Sandstone is formed of accumulation of mineral grains (quartz) and its grain size is from 60 microns to 2 mm.

 

silt stone= Siltstone (SLst)

Siltstone is formed of accumulation of mineral grains (quartz) and its grain size is from 4 to 60 microns.

 

conglomolate= Conglomerate (Cgl), its grain size is greater than 2 mm.

Conglomerate is formed from accumulation of primarily granule, pebble and boulder size particle.

 

fault= Geological fault

 

Related Post

Learn The Basic About Drilling Rig Types from VDO ... This is another training VDO that is very good for entry level personnel who are working in the oilfield industry especially drilling part. This VDO w...
Functions of Drilling Fluid You may not know that drilling fluid or mud has several important functions helping us achieve goal to drill well. I would like to share about the fun...
Washover Operation with Washover Pipe This is a short VDO demonstrating wash over operation with washing tool. If you cannot see it, please find it via youtube here http://youtu.be/2kIQ...
Floating Offshore Structures – Offshore Structure ... There are many oil and gas discoveries which are out of reach of fixed structures for one reason or another. They may be in extremely deep water, or t...
Share the joy
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

About DrillingFormulas.Com

Working in the oil field and loving to share knowledge.
Tagged . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *