# Hydrostatic Pressure Calculation

Hydrostatic pressure is created by fluid column. Two factors affecting hydrostatic pressure are mud weight and True Vertical Depth. In this article, it will demonstrate how to calculate hydrostatic pressure in different oilfield units.

## 1. Calculate hydrostatic pressure in psi by using mud weight  in pound per gallon (ppg) and feet as the units of True Vertical Depth.

Hydrostatic pressure equation:

Hydrostatic Pressure (HP) = mud weight in ppg x 0.052 x True Vertical Depth (TVD) in ft

Example: mud weight = 12.0 ppg
True Vertical Depth = 10,000 ft
HP = 12.0 ppg x 0.052 x 10,000 ft
HP = 6,240 psi

## 2. Calculate hydrostatic pressure in psi by using pressure gradient in psi/ft and feet as the units of True Vertical Depth.

Hydrostatic pressure equation:

Hydrostatic Pressure (HP) = Pressure gradient in psi/ft x True Vertical Depth (TVD) in ft

Example: Pressure Ggradient = 0.5 psi/ft
True Vertical Depth = 10,000 ft
HP = 0.5 psi/ft x 10,000 ft
HP = 5,000 psi

## 3. Calculate hydrostatic pressure in psi by using mud weight in lb/ft3 and feet as the units of True Vertical Depth.

Hydrostatic pressure equation:

Hydrostatic Pressure (HP) = 0.006944 x mud weight, lb/ft3 x TVD, ft

Example: mud weight = 80 lb/ft3 true vertical depth = 10,000 ft
HP = 0.006944 x 80 lb/ft3 x 10,000 ft
HP = 5,555 psi

## 4. Calculate hydrostatic pressure in psi by using mud weight in PPG and meters as unit of True Vertical Depth.

Hydrostatic pressure equation:

Hydrostatic Pressure (HP) = mud weight, ppg x 0.052 x TVD in meters x 3.281

Example: Mud weight = 12.0 ppg true vertical depth = 5000 meters
HP = 12.0 ppg x 0.052 x 5000 x 3.281
HP = 10,237 psi

Download the Excel sheet for calculating hydrostatic pressure

Ref books: Lapeyrouse, N.J., 2002. Formulas and calculations for drilling, production and workover, Boston: Gulf Professional publishing.

Bourgoyne, A.J.T., Chenevert , M.E. & Millheim, K.K., 1986. SPE Textbook Series, Volume 2: Applied Drilling Engineering, Society of Petroleum Engineers.

Mitchell, R.F., Miska, S. & Aadny, B.S., 2011. Fundamentals of drilling engineering, Richardson, TX: Society of Petroleum Engineers.

### Related Post

Starting volume of original mud (weight up with Ca... You know how much volume will be increased due to adding calcium carbonate into the system; however, you sometimes are limited to total volume due to ...
Margin of Overpull in Drillstring Margin of overpull is additional tension to be applied when pulling the stuck drill string without breaking the tensile limit of the drill string. Thi...
Leak Off Test (Procedures and Calcuation) Leak Off Test is conducted in order to find the fracture gradient of certain formation at casing shoe depth. The results of the leak off test also dic...
Equivalent Circulating Density (ECD) Using Yield P... Another equation to determine equivalent circulating density is to use yield point. This formula below is used to calculate the ECD and it is g...
Share the joy
• 383
•
• 5
•
•
•
•
•
•
388
Shares
Bookmark the permalink.

## About DrillingFormulas.Com

Working in the oil field and loving to share knowledge.

### 26 Responses to Hydrostatic Pressure Calculation

1. hamza says:

how to calculat hydrostatic pressure in kg/ltter
thanks

2. leslie says:

i want know how i can calculate the pressure at casing shoe,1000 psi at surface test and tvd of csg shoe 7500 ft and 11.0 ppg for fluid test?

• P at shoe = Surface pressure + Hydrostatic pressure
P at shoe = 1000 psi + (0.052 x 7500 x 11) = 5290 psi.

3. magnus says:

I love this site

4. Cristi says:

Leslie, what did you mean by surface pressure? The pumping pressure?

5. Deni says:

I like this site very much,

Very simple and great explaination.
Very helpful

6. behzad says:

hello , I need to how to calculate the hydrostatic pressure with softwares .is there any software which is able to calculate that?

• You can download our well control or drilling formula spread sheet. There is a formula inside.

7. Mahmoud Nabil says:

I like this site too much (very simple and great info explaination

8. SB Mishra says:

I like this site, very helpful

9. Alan Jorge says:

a little help to solve the problem …A well has been shot in at 10500 TVD, due to flow out increase. MW is 11.5 ppg and SIDPP reaches 600 psi.
What will be the the final STAND PIPE PRESSURE with the kill mud if the initial circulation BEFORE the kick was 2300 psi ?

• Hi Alan,

This is the answer.

ICP = SCR + SIDPP
2300 = SCR +600
SCR = 1700 psi

KMW = OMW + SIDPP/(0.052 x TVD)
KMW = 11.5 + 600 / (0.052 x 10,500)
KWM = 12.6 ppg

FCP = ICP x (KMW/OMW)
FCP = 1,700 x(12.6/11.5)
FCP = 1,863 psi

Final circulating pressure = 1,863 psi.

10. sss says:

how to know hydrostatic pressure difference after cement column set

11. Samuel Tobung says:

This site is very helpful. Thanks

12. Dear sir
This is a v good information for new comers in this field.
If you again start Quiez program it’s much better

13. ibad shumali says:

very thankful to this site….!

14. Pingback: Cual es el Origen de la Constante 0,052 – Perfoblogger

15. aziz says:

Dear Sir,
how to calculate the hydrostatic of brine in annulus, before perform annulus pressure test

• You still use the same formula. The density will be brine density in the annulus side.

16. Motaram Bishnoi says:

What is 0.052

17. Neutron says:

How can i prove this HP=0.052*tvd*mud density

This site uses Akismet to reduce spam. Learn how your comment data is processed.