Well Control Formulas Part 3

This is the 3rd part of well control formulas.

Annulus Capacity Factor (ACF),bbl/ft

Final Circulating Pressure (FCP), psi


Surface To Bit Strokes, strokes


Circulating Time, mins


Capacity Factor (CF), bbl/ft


Opened End Pipe Displacement, bbl/ft


Closed end pipe displacement, bbl/ft


Ref book: Drilling Formula Book Formulas and Calculations for Drilling, Production and Workover, Second Edition
Well Control Books

Related Post

Kill Weight Mud Kill Weight Mud or Kill Drilling Fluid Density is the mud weight required to balance formation pressure. The kill weight mud may be pumped into the we...
Maximum pit gain from gas kick in water based mud In water based mud, you can not only estimate the maximum surface casing pressure, but you are also be able to determine the maximum pit gain due to g...
Lag Time and Its Importance for Well Control Opera... Drilling personnel need to fully understand about the lag time. Lag time is time delay from pressure adjustment made on a choke valve or a choke HCR t...
BOP Stack Organization and BOP Stack Arrangement Blow Out Preventor (BOP) is a very important part of well control equipment and the first thing which we would like to discuss in this article is the ...
Share the joy
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  

About DrillingFormulas.Com

Working in the oil field and loving to share knowledge.
Tagged , . Bookmark the permalink.

2 Responses to Well Control Formulas Part 3

  1. kolawole adetokunbo says:

    GOOD EXPLANATION ON CLOSED END DISPLACEMENT AND OPEN END DISPLACEMENT

  2. Tegynson says:

    I like to know all type of calculations about well control

Leave a Reply

Your email address will not be published. Required fields are marked *