# Bottom Hole Pressure Relationship

This article will show you about bottom hole pressure relationship because this concept is very important for well control concept. The bottom hole pressure is a summation of all the pressure acting on the bottom hole.

Bottom Hole Pressure (BHP) = Surface Pressure (SP) + Hydrostatic Pressure (HP)

The image below demonstrates the relationship of bottom hole pressure.

Note: BHP created by hydrostatic column of drilling fluid is the primary well control in drilling.

Looking more into details,

If BHP is more than FP (formation pressure), this situation is called “Overbalance”.

If BHP is equal to FP (formation pressure), this situation is called “Balance”.

If BHP is less than FP (formation pressure), this situation is called “Underbalance”.

For more understanding, please follow this example below it demonstrates the relationship of BHP, SP and HP.

Bottom Hole Pressure (BHP) = Surface Pressure (SP) + Hydrostatic Pressure (HP)

We assume that formation pressure is normal pressure gradient of water (0.465 psi/ft) so formation pressure at 8000’ TVD = 8000 ft x 0.465 psi/ft = 3720 psi. Click here to learn how to calculate hydrostatic pressure in oilfield.

The first case: Hydrostatic column is water which is equal to formation pressure gradient so SP is equal to 0 psi

The second case: BHP is still be water gradient but fluid column is oil (0.35 psi/ft) which is lower density than water gradient (0.465 psi/ft). Therefore, in order to balance BHP, we need Surface Pressure (SP) of 920 psi (SP = 3720 – (0.35 x 8000)).

The third case: BHP is still be water gradient but fluid column is gas (0.1 psi/ft) which is even lower density than water gradient (0.465 psi/ft). Therefore, in order to balance BHP, we need Surface Pressure (SP) of 2,920 psi (SP = 3720 – (0.1 x 8000)).

According to the example, Surface Pressure (SP) will compensate the lack of hydrostatic pressure (HP) in order to balance formation pressure (FP).

References

Cormack, D. (2007). An introduction to well control calculations for drilling operations. 1st ed. Texas: Springer.

Crumpton, H. (2010). Well Control for Completions and Interventions. 1st ed. Texas: Gulf Publishing.

Grace, R. (2003). Blowout and well control handbook [recurso electrónico]. 1st ed. Paises Bajos: Gulf Professional Pub.

Grace, R. and Cudd, B. (1994). Advanced blowout & well control. 1st ed. Houston: Gulf Publishing Company.

Watson, D., Brittenham, T. and Moore, P. (2003). Advanced well control. 1st ed. Richardson, Tex.: Society of Petroleum Engineers.

Share the joy

Working in the oil field and loving to share knowledge.

### 8 Responses to Bottom Hole Pressure Relationship

1. Iwah Awara says:

pls can u tell me the effect of reservoir fluid on bottom hole pressure and top hole pressure

• Reservoir fluid does not effect bottom hole pressure when in balance condition but in case of well control situation, if the reservoir fluid is gas, it well effect bottom hole and surface pressure.

2. Doki says:

Please what’s the role of Reservoir Pressure, Static Bottomhole Pressure, Hydrostatic head, tubing pressure and flowing bottom hole pressure in determining the size of an EZP pump for a well?

• I think this topic you need to ask reservoir engineers. I don’t have any experience about EZP pump.

3. Joe says:

So why do companies run BHP bombs, if you can just calculate your BHP?

4. Nam Tran says:

Thank you so much for you posts.

I am a fresh graduate. I have just got a job in Halliburton as a FE. However, my major in university is mechanical engineering. This web site is helping me so much to have a basic ideal about my job. I will spend 1 hour everyday to learn from this website!

5. Ubong Idemudo says:

This website is really helpful in demystifying various concepts of drilling practices.

I personally appreciate the people behind the success of drillingformulas.com for sharing these huge amounts of knowledge freely with the public.

Thanks a great deal.

This site uses Akismet to reduce spam. Learn how your comment data is processed.