Functions of Drilling Fluid

You may not know that drilling fluid or mud has several important functions helping us achieve goal to drill well. I would like to share about the functions of drilling fluid as follows;

1. Transport cutting and dispose to surface The drilling fluid brings the drilled material to the ground surface either by mud rheology and velocity.

2. Clean drill bitsAs drilling fluid exits the bit jets, fluid velocity removes cutting from the bit teeth and bit body. This prevents bit ball up situation.

3. Provide hydrostatic pressure to control well while drillingHydrostatic pressure provided from drilling fluid is the primary well control. Mud weight should be high enough to control formation pressure while drilling.

4. Prevent excessive mud loss While drilling, clay particle will form a thin layer over porous zones called “mud cake” or “filter cake”. Mud cake acts as barrier to prevent excessive drilling fluid loss into formation and provides wellbore stability.

5. Prevent formation damage by using reservoir drill-in fluidWhile drilling long reach zone in horizontal wells, the special drilling fluid will be utilized in order to prevent formation damage.

6. Provide hydraulic pressure to downhole assembly (BHA) as mud motor, measuring while drilling (MWD), logging while drilling (LWD), etcWithout enough hydraulic power, downhole tool will not be properly operated, hence, drilling fluid plays essential role to provide power to sophisticated downhole tool.

7. Facilitate downhole measurement as open hole logging, MWD, LWD, mud logging, etcMud will assist tool to measure everything downhole.

8. Lubricate drill string and BHA and cool the bit. The drill bit and BHA become hot due to friction during the drilling process. When the drilling fluid passes through the bit and exits the jets/nozzles, some extra heat is removed via mud.

Reference books: Drilling Fluid Books

Tagged , . Bookmark the permalink.

About DrillingFormulas.Com

Working in the oil field and loving to share knowledge.

4 Responses to Functions of Drilling Fluid

  1. soussi says:

    Please could you give me some clarifications regarding the bullhead and volumetric methods in well control.

    Thank you

    • Bullhead – you pump fluid to push the kick back into the formation. This method will not maintain constant bottom hole pressure
      Volume metric – it is the method to displace kick with drilling mud when the circulation is not permitted.

  2. sarlongki says:

    kindly tell me the difference between over-balance and under-balance.

    thank you

Leave a Reply to sarlongki Cancel reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.