Cutting Slip Velocity Calculation Method 2

This is another method to determine cutting slip velocity. The process of calculation is quite different from the first method however it is still straight forward calculation. It still gives you the following answers: annular velocity, cutting slip velocity and net velocity.

 

Let’s get started with this calculation method.

 

1. Determine n

Where;

n is the power law exponent.

Θ600 is a value at 600 viscometer dial reading.

Θ300 is a value at 300 viscometer dial reading.

Continue reading

Cutting Slip Velocity Calculation Method 1

Cutting slip velocity is velocity of cutting that naturally falls down due to its density. In order to effectively clean the hole, effect of mud flow upward direction and mud properties must be greater than cutting slip velocity (settling tendency of cuttings). Otherwise, cutting will fall down and create cutting bed.

You can learn more detail about it via this topic -> Cutting Slip Velocity

This calculation will show annular velocity, cutting slip velocity and net velocity so you can use as a reference for you hole cleaning indication.

There are 2 calculation methods and I will show the first method via this topic.

Continue reading