# Understand About Formation Pressure

Formation pressure is the pressure of fluid contained in pore space of rock and there are 3 categories of the formation pressure which are normal pressure, abnormal pressure and subnormal pressure.

1. Normal Pressure: Normal pressure is the hydrostatic of water column from the surface to the subsurface formation.  It can be simply stated that normal pressure is equal to hydrostatic pressure gradient of water in pore spaces of  formations on each area. The concentration of salt in water affects the normal pressure. Higher salt concentration in water, higher specific gravity of water will be. Therefore, the normal pressure can vary from slightly salt 0.433 psi/ft (8.33 PPG) to highly concentrated salt 0.478 psi/ft (9.2 PPG) based on salt concentration in water. Table 1 demonstrates the average normal pressure gradient based on several areas.

Table 1 – Average Normal Pressure Gradient from Some Areas

2. Abnormal Pressure: The abnormal pressure is the pressure greater than the pressure column of water (normal pressure). Generally, the abnormal pressure zones are good reservoir which oil companies are looking for. This kind of pressure has the highest potential leading to a well control problem.

3. Subnormal Pressure: The subnormal pressure is the pressure that is less than normal pressure and it  possibly causes lost circulation problems.

Looking at the drawing below (Figure 1), it demonstrates the comparison of formation pressure when drilling into each pressure regime. At the same True Vertical Depth (TVD), subnormal pressure shows least pressure in comparison to others. However, abnormal pressure gives the highest pressure at the same level of TVD.

Figure 1 – Simplified Formation Pressure Illustration

References

Coleman, S. (2018). Well Control Quiz Online. [online] Well Control Quiz Online – Test Your Well Control Knowledge for Free. Available at: http://wellcontrolquiz.com/ [Accessed 2 Aug. 2018].

Cormack, D. (2007). An introduction to well control calculations for drilling operations. 1st ed. Texas: Springer.

Crumpton, H. (2010). Well Control for Completions and Interventions. 1st ed. Texas: Gulf Publishing.

Grace, R. (2003). Blowout and well control handbook [recurso electrónico]. 1st ed. Paises Bajos: Gulf Professional Pub.

Grace, R. and Cudd, B. (1994). Advanced blowout & well control. 1st ed. Houston: Gulf Publishing Company.

Watson, D., Brittenham, T. and Moore, P. (2003). Advanced well control. 1st ed. Richardson, Tex.: Society of Petroleum Engineers.

Share the joy
Bookmark the permalink.

## About DrillingFormulas.Com

Working in the oil field and loving to share knowledge.

### 3 Responses to Understand About Formation Pressure

1. kresimer zubac says:

is there any sheet or software good for pore pressure prediction while drilling?
thanks.

2. Charlie says:

Formation pressure predicted by the offset wells.

This site uses Akismet to reduce spam. Learn how your comment data is processed.