Reserve Fluid System in Koomey
According to API RP53, each closing unit should have a fluid reservoir tank with a capacity equal to or at least twice the usable fluid capacity of the accumulator system and reservoir fluid is stored at atmospheric pressure
Pumping System in Koomey Unit
Pumps in the Koomey Unit provide power to charge bottles to 3,000 psi. According to API RP53, it states about the pumping system as follows:
• Two or three independent sources of power (Air, Electric or Nitrogen)
• For surface accumulators: With the accumulator removed from service, each pump system should be capable of closing the annular BOP on drill pipe, opening HCR and obtaining a minimum pressure of 200 psi over pre-charge pressure within 2 minutes.