Category Archives: Oil Field Knowledge

Can you imagine if primary and secondary well control are failed? Well is flowing all the time so how can we deal with this situation? For this situation, you must use Tertiary Well Control.

Tertiary Well Control is specific method used to control well in case of failure of primary and secondary well control. These following examples are tertiary well control:

• • Drill relief wells to hit adjacent well that is flowing and kill the well with heavy mud.

BP Macondo Well – Relief Wells

• • Dynamic kill by rapidly pumping of heavy mud to control well with Equivalent Circulating Density (ECD)
  • Pump barite or gunk to plug wellbore to stop flowing
  • Pump cement to plug wellbore

References

Coleman, S. (2018). Well Control Quiz Online. [online] Well Control Quiz Online – Test Your Well Control Knowledge for Free. Available at: http://wellcontrolquiz.com/ [Accessed 2 Aug. 2018].

Cormack, D. (2007). An introduction to well control calculations for drilling operations. 1st ed. Texas: Springer.

Crumpton, H. (2010). Well Control for Completions and Interventions. 1st ed. Texas: Gulf Publishing.

Grace, R. (2003). Blowout and well control handbook [recurso electrónico]. 1st ed. Paises Bajos: Gulf Professional Pub.

Grace, R. and Cudd, B. (1994). Advanced blowout & well control. 1st ed. Houston: Gulf Publishing Company.

Watson, D., Brittenham, T. and Moore, P. (2003). Advanced well control. 1st ed. Richardson, Tex.: Society of Petroleum Engineers.

Referring to the previous section, primary well control is hydrostatic pressure bore that prevents reservoir influx while performing drilling operations (drilling, tripping, running casing/completion, etc). When primary well control is failed, it causes kick (wellbore influx) coming into a wellbore. Therefore, this situation needs special equipment which is called “Blow Out Preventer” or BOP to control kick.

Blow Out Preventer

We can call that “Blow Out Preventer” or BOP is Secondary Well Control. Please also remember that BOP must be used with specific procedures to control kick such as driller method, wait and weight, lubricate and bleed and bull heading. Without well control practices for using BOP’s, it will just be only heavy equipment on the rig.

There are several types of “Blow Out Preventer” (BOP) which have different applications. we will talk about BOP categories later.

References

Coleman, S. (2018). Well Control Quiz Online. [online] Well Control Quiz Online – Test Your Well Control Knowledge for Free. Available at: http://wellcontrolquiz.com/ [Accessed 2 Aug. 2018].

Cormack, D. (2007). An introduction to well control calculations for drilling operations. 1st ed. Texas: Springer.

Crumpton, H. (2010). Well Control for Completions and Interventions. 1st ed. Texas: Gulf Publishing.

Grace, R. (2003). Blowout and well control handbook [recurso electrónico]. 1st ed. Paises Bajos: Gulf Professional Pub.

Grace, R. and Cudd, B. (1994). Advanced blowout & well control. 1st ed. Houston: Gulf Publishing Company.

Watson, D., Brittenham, T. and Moore, P. (2003). Advanced well control. 1st ed. Richardson, Tex.: Society of Petroleum Engineers.

Primary Well Control is hydrostatic pressure provided by drilling fluid more than formation pressure but less than fracture gradient while drilling. If hydrostatic pressure is less than reservoir pressure, reservoir fluid may influx into wellbore. This situation is called “Loss Primary Well Control”.

Not only is hydrostatic pressure more than formation pressure, but also hydrostatic pressure must not exceed fracture gradient. If mud in hole is too heavy, it will cause a broken wellbore, you will face with loss circulation problem (may be partially lost or total lost circulation). When fluid is losing into formation, mud level in well bore will be decreased that will result in reducing hydrostatic pressure. For the worst case scenario, you will lose the primary well control and wellbore influx or kick will enter into wellbore.

Typically, slightly overbalance of hydrostatic pressure over reservoir pressure is normally desired. You must keep in mind about the basic of maintaining primary well control that you must maintain hole with drilling fluid that will be heavy enough to overbalance formation pressure but not fracture formations.

References

Coleman, S. (2018). Well Control Quiz Online. [online] Well Control Quiz Online – Test Your Well Control Knowledge for Free. Available at: http://wellcontrolquiz.com/ [Accessed 2 Aug. 2018].

Cormack, D. (2007). An introduction to well control calculations for drilling operations. 1st ed. Texas: Springer.

Crumpton, H. (2010). Well Control for Completions and Interventions. 1st ed. Texas: Gulf Publishing.

Grace, R. (2003). Blowout and well control handbook [recurso electrónico]. 1st ed. Paises Bajos: Gulf Professional Pub.

Grace, R. and Cudd, B. (1994). Advanced blowout & well control. 1st ed. Houston: Gulf Publishing Company.

Watson, D., Brittenham, T. and Moore, P. (2003). Advanced well control. 1st ed. Richardson, Tex.: Society of Petroleum Engineers.