Practical Considerations for Stripping Well Control Operation

This section will discuss some practical stand points of the stripping operation with and without volumetric control. Additionally, this will summarize some key points for both methods of stripping for off bottom well control.

practical consideration

General Practical Considerations

Stripping operation requires accurate measurement of fluid bled off therefore it is very critical to have a small trip tank or a stripping tank for the operation. Furthermore, when the drillstring is stripped deeper, you might need to fill the pipe. You need to ensure that the volume filled up will not create any confusion with the bleed of volume. There are some cases when personnel don’t track the volume properly and finally the kick is unintentionally introduced into the wellbore. Continue reading

Two New Efficient Oil Drilling Techniques

Two new efficient oil drilling techniques

The U.S. increased oil reserves can be attributed to the development of revolutionary technology that has enabled them to extract oil from the ground.

Thanks to the efforts of Texas Tech University, miners have improved their methods of drilling and extracting oil in the form of “Zipper Fracking.” This method is similar to the more common hydraulic fracking but instead of drilling one well, miners drill two wells side by side. After both wells have been drilled, they are then fracked at the same time.

The second drilling technique that miners have begun to use is called “Stacked Laterals.” It is most useful in offshore drilling since building platforms just to extract oil from shale out in the ocean isn’t that cost-effective. So whenever operators are out in the water, they now drill several wells from a single pad (ergo, stacked laterals). This saves time but and money, with the stacked laterals increasing oil production by around 200%.

From June 2011 to June 2014, several major shale regions in the U.S. that used the new drilling methods have enjoyed an increased amount of yields. In Eagle Ford Texas, production per drilling rig increased from 198 barrels a day in 2011 from 476 barrels in 2014. In Bakken, oil production increased from 213 barrels a day to 505.

New drilling techniques make oil extraction easier and it will be more economical with the discovery of new technology. Sulzer, Unaoil’s associate in servicing oil and gas firms in Iraq, has developed a new generation hydro-powered water drill which is both cost-effective and environmental friendly because it uses water instead of oil for lubrication. It is now being used by some firms and could potentially be a game-changer in the future of oil drilling.

Currently, there’s no end in sight for the U.S.’ production of oil. Experts predict that it will continue to soar as private companies are continuously finding ways to extract more oil from shale.

Perforating For Inflow Performance In Natural Completions – SPE Distinguished Lecturer Program

This is the distinguished lecturer program supported by SPE in the topic of “Perforating For Inflow Performance In Natural Completions” By Mark S Brinsden. This presentation is very interesting  about inflow performace of the well and perforation.

What will you learn from this presentation?

  • Introduction
  • The Traditional Approach To Perforating
  • Measuring Perforator Performance
  • Modeling Perforators For Well Performance
  • Case History
  • Recent Advances In Perforating Technology
  • Implementing What We Have Learned

These images are samples of presentation.

PERFORATING FOR INFLOW PERFORMANCE 1 Continue reading

Water Well Drilling – Old School

I am not sure which country. This is how they actually drill a water well with very old school method.

Basically from what I’ve seen from the footage, it has the set up which is similar to a drilling rig. There is a circulating hose connected at the top. One man rotates the tubular and this represents a rotating system on the rig as a rotary table or top drive. Since there is no weight (I guess), one man stand on top of the tubular while being rotated in order to apply weight down hole in order to make a hole. The return is back from the annulus to surface and this is similar to mud circulating system.

30 old school water well drilling

This is very interesting to learn how people use their tool to drill a water well. I think they don’t know how to drill like us but they know how the basic system should be.

Any comments?

5 Useful Oilfield Resume Templates

Your oilfield resume is one of the most important parts to get interviewed for oil and gas jobs. With current oil price, it is even harder to get hired into this industry and a lot of people are looking for new positions because of this slow down trend. However, there are still plenty of positions in oilfield but you need be outstanding from groups of people.

free resume template

 

Not only do you have professional look resume, you must also properly format your CV to catch your potential employee eyes. You may ask how to get the right layout for your oilfield CV. Our simple answer is to use resume templates.

We would like to share 5 professional oilfield resume templates which you can freely modify to match with your experience. These CV templates are simple styles which look very professional for job application.

How Can I Do That?

You need to write a professional resume definitely and you can find how to write excellent oilfield resume from here –

Continue reading